Thursday, December 18, 2014

Error in iTunes, iPhone and iPod Touch (March 3), solve all the synchronization errors and maintenance

This is the list of all the usual mistakes mobile / cell phone iPhone. It is a compilation of all the errors that exist in other sites, including Apple's official website and some who have written us. As we get a little time, will refine the descriptions and translation.
Due to the size we have divided the list into three pages:
  1. List of errors that appear in hexadecimal, text messages and errors with the numbers 1 to 50.
  2. List of errors from 1000 to 1644 .
  3. List of errors from the number 2000. (current page).

Error Number 2000 to 2009

  • Error 2000-2009 (2001, 2002, 2005, 2006, 2009, etc). With any of these errors, test:
    • With Apple devices: disconnect all devices that are connected to your computer (cables, hubs, third screens, etc) and reset the SMC as explained in http://support.apple.com/kb/HT3964?viewlocale = es_ES ). Finally make a recovery.
    • If you use Windows, do the same but not unplug the mouse or keyboard. Restart your computer and try to restore.
    • If the above does not solve the problem, follow the steps described for error 20000. If you still have problems, follow the steps to fix the 1604 error . ( http://www.drpc.es/error-en-itunes-iphone-e-ipod-touch-solucion-a-todos-los-errores-de-sincronizacion-y-mantenimiento-2/ ), used to solve many problems with USB.
    • If you still have problems, it may be because of some security software (antivirus, etc). See this site: http://support.apple.com/kb/TS3125?viewlocale=es_ES .
  • Error 2001. In late 2008 and early 2009, an update for MacBooks that were included failure. Specifically an extension of the kernel (the core) of Mac OS X that was called "IOUSBFamily". The same ruling was on the update 10.5.6 and caused could not recognize a device in DFU mode. To fix follow one of the following steps:
    • Upgrade to version 10.5.7 (or higher).
    • Use another USB port.
    • Follow the instructions in the "Error 2000-2009 (2001, 2002, 2005, 2006, 2009, etc)" section.
  • Error 2002. This is because iTunes can not connect to the Apple website, either on the web or errors usually because another program is using the connection. Try restarting the computer, If the error continues, try to follow the steps listed for Error 2000.
  • Error 2003. This problem is usually due to an error in the USB.
    • Verify that the USB cable is connected.
    • Especially if the error "Sn0wbreeze failed to restore IPSW file", try unplugging, wait a few seconds and then reconnect.
    • Try connecting the USB cable to another USB connector.
    • If you still have problems, follow the instructions to resolve the Error 2000.
  • Error 2004. Follow the instructions to fix the Error 2000.
  • Error 2005. There is a problem with the connection as a hardware error. Follow the instructions to fix the Error 2000.
  • Error 2006, 2007, 2008 and 2009. Follow the instructions to fix the Error 2000.

Error Number 3000 to 4999

  • Error 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, etc.). Most 3000-odd errors are related to that iTunes can not contact the update server gs.apple.com . It uses ports 80 or 443. Most of these errors are corrected by following the steps listed for Error 3194.
  • 3002 Error. Unable to check if the firmware is original from Apple or an "unofficial" version, either due to damage or also see this error if you use an "unofficial" firmware.
    • Skip this item if you have an iPhone 3G or iPod touch 2nd generation. But if you enable the option in iTunes that says "Restore" (or "Update").
    • Having upgraded, it sometimes happens that the Apple server does not work and can not check if your firmware is authentic, or one "unofficial" (or maybe damaged). From DrPC recommend allow some time and try the operation again to see if you contact Apple and gives the nod.
    • Another cause is when the firmware has been updated with an application called TTS Tinyumbrella, or when attempting to connect the web of Cydia. Leave spend some time and try the operation again.
    • Another reason may be that you have a 3G Phone or iPod touch second generation, and the upgrade happens the error 3002. You must update the iTunes and if still fails do a restore.
  • Error 3003. If you read this error is because the text you are reading it copied the web DrPC and copied his huge list of página http://www.drpc.es/error-en-itunes-iphone-e-ipod-touch-solucion-a-todos-los-errores-de-sincronizacion-y-mantenimiento/ ya This error does not exist.
  • Error 3004. This error occurs when attempting to restore the firmware without an Internet connection. To fix it:
    • You have to connect to the Internet and try again.
    • If still not working, it is because iTunes can not connect to the web gs.apple.com .
    • If you use Mac, sometimes this error is solved by closing the iTunes software and then type in the command line as follows: "dscacheutil -flushcache" (without quotes writing with a space before the "-").
    • The ports 80 and 443 are blocked due to security software (antivirus, firewalls, etc) or maybe have to open ports on the router (look for "How to open ports on the router" with Google).
    • If still not working, follow the same instructions as for Error 3000.
  • . Error 3014 could be several causes:
    • Your disk is too full, delete files you no longer need for more space.
    • Follow the same steps that need to solve the error 3004.
  • Error 3018. Follow the same steps that need to solve the error 3000.
  • Error 3094. Follow the same steps that need to solve the error 3000.
  • Error 3123.'re One of those few people who have spent the money to rent movies.
  • Error 3164. Follow the same steps that need to solve the error 3000.
  • Error 3191. Usually because QuickTime is damaged. To fix it:
    • In Mac, reinstall the QuickTime software.
    • In Windows, try reinstalling QuickTime to a newer version.
    • In Windows, if still giving problems, find the file "C: \ Program Files \ QuickTime \ QuickTimePlayer.exe" or "C: \ Program Files (x86) \ QuickTime \ QuickTimePlayer.exe". Simply click the right mouse button over the file "QuickTimePlayer.exe", select "Properties", click the "Compatibility" tab and finally clear the "Run this program in compatibility mode for" and click the "OK" button.
  • Error 3194.
    1. Upgrade to the latest version of iTunes ( http://www.apple.com/es/itunes/download ).
    2. This error can also cause security software companies outside Apple (antivirus, firewalls, etc.) or an incorrect configuration of the router (in the section related to security). The problems related to security can be solved by following the steps indicate the following website: http://support.apple.com/kb/TS3125?viewlocale=es_ES
    3. This error can happen when an old version of iOS installed and this is not supported. If you've installed some software to make unauthorized modifications to the iOS device, this sometimes redirects connections to the official Apple update server ( gs.apple.com ). You must uninstall this software from your computer and try again, if you do not, it will return to redirect and steps outlined below will avail nothing. More information on this subject on the web: http://support.apple.com/kb/HT3743?viewlocale=es_ES
    4. If problem continues, look for the file called "hosts" on your computer and removes redirection " gs.apple.com ". For the changes to take effect you will have to restart the computer. If you see there is a very complicated manual "step by step" at this website: http://support.apple.com/kb/TS3297?viewlocale=es_ES if you can not find it, look where it says "Blocked by configuration" and you will explain how to rebuild communications between your computer and the official Apple update server. If you're still aclararte, do the following:
      1. MAC OS: Open Terminal and type without quotes: "sudo /Applications/TextEdit.app/Contents/MacOS/TextEdit/etc/hosts" and modify the line that says: "74.208.105.171 gs.apple.com". Then restart the computer.
      2. Windows: searches the folder "c: / windows / ystem32 / drivers / etc /" and open the file named "hosts" with Notepad or the text editor you prefer. Removes the text that says "74.208.10.249 gs.apple.com". Then restart the computer.
    5. Avoid use an .ipsw old or "unofficial" file. The .ipsw are files that update the operating system for your iPhones, iPods, iTouchs. Try downloading and installing a more updated .ipsw file. If all else fails, try to restore with a new user and so you will ensure that iTunes will download a new .ipsw file and in perfect condition ..
  • Error -3198. You are trying to install an "unofficial" or simply the file is corrupted firmware.
  • Error 3200. Internet does not work, or anywhere you are trying to access is too saturated. Try again later.
  • Error -3259. Timeout exhausted connection (timeout), then try again.

Error Number 5000 to 9844

  • Error -5000. You can not write data to the "Applications Mobiles" folder because no writable
  • Error 9006. Follow the same steps to resolve the Error 2.
  • 9008 Error. Error downloading, try again.
  • Error -9800. Set the exact date, restart the computer. See also the article by Apple. See Apple article http://support.apple.com/kb/TS3297?viewlocale=es_ES .
  • Error 9807. The date or time on your computer is incorrect. If they are right, the problem is possibly because they can not access servers VeriSign: evintl-ocsp.verisign.com and evsecure-ocsp.verisign.com This can happen because of a blockage VeriSign because of misconfigured router, antispyware or antivirus software, security software and parental control software (to prevent children from accessing "bad" pages). See the following section of iTunes for Windows: Troubleshooting security software ( http://support.apple.com/kb/TS3125?viewlocale=es_ES ).
  • Error -9808. When your computer is misconfigured. More information on the web: http://support.apple.com
  • Error -9808. Unknown to connect, to solve the problem follow the instructions on page Error http://support.apple.com/kb/TS3297?viewlocale=es_ES . If this does not help or if after restarting the settings revert to the initial settings, follow the following instructions on the website entitled "iTunes for Windows: Troubleshooting security software" http://support.apple.com / kb / TS3125? viewlocale = en_US .
  • Error -9812. Like the Error -9808. If you find that you are properly connected to the Internet is not fixed. If work does not update root certificates. More information on the web: http://support.apple.com/kb/TS3222?viewlocale=es_ES and http://support.apple.com/kb/TS3297?viewlocale=es_ES .
  • Error -9814. Like the Error -9808.
  • Error -9815. Like the Error -9808.
  • Error -9843. You're downloading something you tried to download when you had not yet entered your username and password. And when you enter your username and password, it turns out that what you were trying to download no longer exists (because they just removed or because Apple boys are sometimes a bit sloppy).
  • Error 9844. Your firewall is misconfigured and does not allow connections to Apple computers ..

Errors with a higher number 11222

  • Error 11222. Same as Error 3194.
  • 13019 Error. Error synchronizing media files between iTunes and your device. To solve the problem with the different test solutions are explained in the Error 3194.
  • . Error 20000 This is due to an error with the USB, because of these reasons:
    • The USB cable is damaged. Try another cable.
    • USB drivers are not correct or are outdated. Generally these drivers are supplied by the same manufacturer as your motherboard.
    • Other devices are connected via USB, are affecting the communication between the apparatus and IOS software. Unplug all appliances you can (but do not unplug the mouse or keyboard!) And try to connect the USB cable into a different USB slot. Restart the computer, because sometimes it is "silly" when there are conflicts between different devices for access control to USB. When rebooted, if everything has gone well try to reconnect all devices (one to one) that you were connected by USB, for if one is causing the conflict.
    • Sometimes there are some packages of Microsoft called "thematic" that radically change the look of your desktop. If you use one of them and still have problems with the USB, try to put the theme "default", restart the computer and test it to see the restoration. More information about the problem of thematic packages in this web: http://support.apple.com/kb/HT1414?viewlocale=es_ES
  • Error 20001. Follow the same steps that the error resolution 20000.
  • Error 20002. Follow the same steps that the error resolution 20000.
  • Error 20003. Follow the same steps that the error resolution 20000.
  • Error 20004. Follow the same steps that the error resolution 20000.
  • Error 20005. Follow the same steps that the error resolution 20000.
  • Error 20006. Follow the same steps that the error resolution 20000.
  • Error 20007. Follow the same steps that the error resolution 20000.
  • Error 20008. This error occurred on a Mac with Tinyumbrella running before doing a restore to an Apple TV.
  • Error 20008. Follow the same steps that the error resolution 20000.
  • Error 40265xxxx. This type of error (eg 402659283) usually appears as a backup is restored. When this error occurs, the iOS is already installed on the device, so to solve the problem can enter setup and look for an option that says "Restore as new" or something similar. By the way, before "Restore as new" make a copy of the "Backup" folder on your desktop to keep previous backups you have made with iTunes, then follow this manual "step by step" what do: http://support.apple.com/kb/HT1766?viewlocale=es_ES and so you know where the backups are stored on your computer and other important things.
Due to the size we have divided the list into three pages:
  1. List of errors that appear in hexadecimal, text messages and errors with the numbers 1 to 50.
  2. List of errors from 1000 to 1644 .
  3. List of errors from the number 2000. (current page).

No comments:

Post a Comment